Русский

Wheelchair Lifts

Wheelchair lifts for unaccompanied wheelchair users model ПП-2015

ПП-2015 elevating platforms are usually installed by unwatched entrance halls in order to transport wheelchair users from the sidewalk level to the ground floor where a passenger elevator is located (maximum travel of up to 2m), or in order to lift a wheelchair user from the sidewalk level to the first floor (maximum travel of 2-4m).

Specifications for wheelchair lifts with of up to 2m rise capacity

  • Capacity - 200kg
  • Speed - 0.15m/s
  • 2 stops
  • Well sizes - 1560 х 1500mm
  • Cab sizes - 900 х 1250 х 2000mm
  • Door sizes - 900 х 2000mm
  • Dual entrance cab
  • Telescopic shaft doors

Specifications for wheelchair lifts with 2-4m rise capacity

  • Capacity - 200kg
  • Speed - 0.15m/s
  • 2 stops
  • Well sizes -1730 х 1500mm
  • Cab sizes - 900 х 1250 х 2000mm
  • Door sizes - 900 х 2000mm
  • Dual entrance cab
  • Telescopic shaft doors

Operation

To call a lifting platform the passenger needs to turns a special key in the elevator lock and press a call button. The platform arrives at the loading zone. By pressing a floor selection button and holding it, the passenger sets the platform in motion until the second stop is approached. If during travel the passenger releases the floor selection button and presses it again, the elevator starts moving in the opposite direction. The elevator can be exploited by unaccompanied wheelchair users. In case of power outage, the platform returns to the landing place.

Design advantages

  • platform is surrounded with well walls
  • platform is automatically adjusted to the stop level
  • secure and reliable
  • easy in exploitation
  • vandal-resistant
  • surrounded with metal well
Passenger elevators for wheelchair users index ПП-0601I

Application
Passenger elevator ПП-0601I is designed for residential and commercial buildings to transport passengers including wheelchair users. Weight of the passengers and accompanied cargo should not exceed elevator capacity.

Elevator Specifications

  • Capacity - 630kg
  • Speed - 1m/s
  • Maximum travel - 75m
  • Maximum number of stops 17
  • Cab sizes - 1140mm х 1440mm
  • Door width - 900mm
  • Well sizes - 1950mm х 2000mm
  • Areaway depth - 1400mm
  • Top floor height - 3500mm

Distinctive characteristics of the elevator construction:

  • Control panel is located on wheelchair level
  • Door width - 900mm

Operation

When the call button is pressed on the landing floor, the cab accurately arrives at the stop level. Elevator doors open automatically. Wheelchair user enters the cab and pushes the floor select button on control panel. The doors close automatically. The elevator starts its motion gradually reaching its normal speed. When the cab approaches a sensor on the requested floor, the elevator slows down, accurately stops at the floor level and opens the doors. The wheelchair passenger exits the cab, the doors close, the cab stays on the same floor until another call comes in.

Platform lift for unaccompanied wheelchair users. Model ППO-2008

Application

ППO-2008 platform lift is intended for wheelchair users to be transferred from the ground level to the elevator landing floor.

Platform lift (open type) is mounted on a free-standing metal structure.

It is a walk-through platform with safety catches - rails by the sides of the platform. Entrance and exit of the platform lift are equipped with manual lift gates.

Call buttons are installed on the metal structure.

Lift control panel is placed inside the platform lift on one of its side walls.

Both stops are equipped with special moving gates at the entrance and exit zones. After leaving the platform, the gate automatically blocks the access to the platform zone. When the platform approaches the loading zone, the gate automatically opens.

In the picture the platform is located between two loading zones. The lift gates and railings are closed.

Specifications

  • Capacity - 200kg
  • Speed - 0.08m/s
  • Number of stops - 2
  • Maximum travel - 2000mm
  • Loading platform sizes - 850mm х 1250mm x 1100mm (width x depth x height)
  • Platform and metal well sizes - 1400mm х 1500mm x elevation height + 2250mm (width x depth x hight)
Inclined platform lift for unaccompanied wheelchair users. Model ПИН 2010

Application

ПИН 2010 platform lift is designed for transportation of unaccompanied wheelchair users from a building entrance level to the elevator loading zone located inside the building.

The platform lift is mounted on a metal structure attached to the wall by the flight of stairs.

It is a walk-through platform.

Entrance and exit are equipped with automatic lift gates.

Call buttons are situated in the loading zones.

Control panel is located on the lift platform.

The lift construction allows automatic folding/unfolding of the platform in the loading zones to free the stair case area.

Specifications 

  • Capacity - 225kg
  • Maximum speed - 0.15m/s
  • Number of stops - 2 
  • Maximum travel 1500mm
  • Platform sizes - 800mm х 1250mm (width x depth)
  • Type of drive - motor reduction unit with a rack-and-gear drive